Página Inicial CNEA Laboratorio TANDAR Página Inicial TANDAR Historia del acelerador TANDAR Web interno Web mail
Inicio » Actividades I+D > Publicaciones 2008 > A comparison between a TESQ accelerator ...
artículo con referato
"A comparison between a TESQ accelerator and a reactor as a neutron sources for BNCT"
A.A. Burlon and A.J. Kreiner
Nucl. Instrum. Meth. B 266(5) (2008) 763-771
In this work, the performance of an accelerator-based neutron source design has been compared with that of a modern fluoride-filtered reactor-based epithermal beam having near-optimal quality for treatment of deep seated tumors in relation to its applicability for BNCT. The accelerator is a Tandem-Electrostatic-Quadrupole (TESQ) accelerator which is a design under development at the National Atomic Energy Commission (CNEA) in Buenos Aires, Argentina based on the 7Li(p,n)7Be reaction, relatively close to its energy threshold. The reactor is the Massachusetts Institute of Technology reactor upgraded with a Fission Converter Beam (MIT-FCB) and improved with an 8 mm thick 6Li filter. The comparison has been done by means of data reported on the MIT-FCB + 6Li filter performance and MCNP simulations on our TESQ design considering the neutron fluxes provided by the two sources and the doses delivered in a human phantom by both devices. The results show a deeper advantage depth (AD) for the TESQ which turns out to be a promising alternative to a reactor-based BNCT treatment.
Av. Gral Paz y Constituyentes, San Martín, Pcia. de Buenos Aires, Argentina
Tel: (54-11) 6772-7007 - Fax: (54-11) 6772-7121